CSS V-Wrap™ HMPCA
CSS V-Wrap HMPCA is a high-strength, high-modulus, non-corrosive precured carbon anchor designed to be partially field laminated with CSS V-Wrap 770 epoxy to create a carbon fiber reinforced polymer (CFRP) composite anchor for enhanced detailing of CSS V-Wrap fabrics. The portion of the anchor intended to be embedded into the substrate is factory saturated and precured.
Key Features
- Manufactured using ICC-approved raw materials
- High tensile modulus and strength
- Lightweight
- Noncorrosive
Product Details
Key Features
- Manufactured using ICC-approved raw materials
- High tensile modulus and strength
- Lightweight
- Noncorrosive
- Flexible
- Various finish options
Applications
The CSS V-Wrap HMPCA precured carbon anchor is combined with CSS V-Wrap epoxies and can be used as a standalone reinforcement or to improve end details and anchorage of various CSS V-Wrap designs.
- Load increases
- Seismic strengthening
- Repair of structural elements
- Change in structural system
- Design or construction defects
Color
- Black
Storage Conditions
- Store dry at 40°F – 90°F (4°C – 32°C)
Options
CSS V-Wrap HMPCA are special-order precured carbon fiber anchors available in the diameters listed below in custom lengths in folded versions for termination anchoring and unfolded versions for through anchoring. Please contact Simpson Strong-Tie for ordering instructions.
| Part # | Diameter |
| CV-HMPCA25X | 1/4″ (6.4 mm) |
| CV-HMPCA37X | 3/8″ (9.5 mm) |
| CV-HMPCA50X | 1/2″ (12.7 mm) |
| CV-HMPCA62X | 5/8″ (15.9 mm) |
| CV-HMPCA75X | 3/4″ (19.1 mm) |
| CV-HMPCA87X | 7/8″ (22.2 mm) |
| CV-HMPCA100X | 1″ (25.4 mm) |
| CV-HMPCA112X | 1 1/8″ (28.6 mm) |
| CV-HMPCA125X | 1 1/4″ (31.8 mm) |
| CV-HMPCA137X | 1 3/8″ (34.9 mm) |
| CV-HMPCA150X | 1 1/2″ (38.1 mm) |
Literature
Code Reports & Compliance
| Product Series | Compliance/Certification | Report/Approval |
| CSS V-Wrap™ HMPCA | Hazard Communication Standard | Safety Data Sheet for CSS V-Wrap™ HMPCA |
